 |
Tools World |
|
In this category, we offer a selection of tools for modeling, figures, miniatures and model kits, most popular or most needed for good preparation of your parts.
|
 |
Colle 21 – Cyanoacrylate Glue |
Ref : DMT040
Colle 21 is an anaerobic cyanoacrylate glue, and works on various materials such as resin, white-metal, plastics (except PE, PP, PTFE), photoetch, extruded polystyrene (depron), rubber, metal, ceramics, wood, lea...
|
| Colle 21 – Cyanoacrylate Glue |
 |
Lead Foil |
Ref : DMT001
Very malleable lead foil for building parts of model kits and figurines as belt, strap, flag, cap, tank, muffler and others ...
|
| Lead Foil |
 |
Milliput Yellow-Grey |
Ref : DMT038
The Milliput yellow-grey is a two components epoxy putty air-hardening, allowing you to fill the joints or repair your parts or model kits, as well as create and sculpt accessories or your own ...
|
| Milliput Yellow-Grey |
 |
Milliput Superfine White |
Ref : DMT039
The Milliput yellow-grey is a two components epoxy putty air-hardening, allowing you to fill the joints or repair your parts or model kits, as well as create and sculpt accessories or your own ...
|
| Milliput Superfine White |
 |
Set of 20 drills |
Ref : DMT004
For use with a hand drill or with an electric mini drill.
Diameters: 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.55 - 0.6 - 0.65 - 0.7 - 0.75 - 0.8 - 0.85 - 0.9 - 0.95 - 1 - 1.2 - 1.3 - 1.4 - 1.5 - 1.6mm
|
| Set of 20 drills |
 |
Set of 10 drills |
Ref : DMT013
For use with a hand drill or with an electric mini drill.
Diameters : 0.6 - 0.8 - 1 - 1.2 - 1.4 - 1.6 - 1.8 - 2 - 2.2 - 2.4mm
|
| Set of 10 drills |
 |
Hand Chuck / Hand Drill |
Ref : DMT002
Hand Chuck for all drills from 0 to 3.2 mm.
4 sizes of clamps are available on both…
|
| Hand Chuck / Hand Drill |
 |
Mini Drills |
Ref : DMT014/22
Mini Drills in batch of 6 for use with an electric mini-drill or hand drill (hand chuck).
9 sizes available: 0.3 - 0.4 - 0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.2 mm ...
|
| Mini Drills |
 |
Cutting Map |
Ref : DMT031/32
This cutting mat will protect your working surface and extend the life-time of your blades.
Dimensions 300 x 220 mm (A4, small) and 450 x 300 mm (A3, large).
Hard and ...
|
| Cutting Map |
 |
Jammydog Masking Tape |
Ref : DMT033/37
Masking tape to achieve strips or protect some areas.
The band allows the radius curves, and is easily to remove without damaging …
|
| Jammydog Masking Tape |
 |
Micro-Balloon |
Ref : DM050
Micro-balloon powder can fill holes, cracks, joins very quickly.
That you free of filler putty and you will gain valuable time, you can continue your work immediately.
Fill the cavity of...
|
| Micro-Balloon |
 |
Extra-Fluid Cyanoacrylate Glue ZAP |
Ref : DMT010
Multi-use Cyano Glue, perfect for resin, styren plastic card and white metal…
This type of superglue is very fluid and seeps by capillarity between the parts to be glued. You can glue the pieces held in ...
|
| Extra-Fluid Cyanoacrylate Glue ZAP |
 |
Cyanoacrylate Glue ZAP |
Ref : DMT009
Multi-use Cyano Glue, perfect for resin, styren plastic card and white metal…
|
| Cyanoacrylate Glue ZAP |
 |
Mini-Needle Files |
Ref : DMT012
Set of 12 mini-files of different shapes: flat, round, half-round, triangular, square, etc ...
|
| Mini-Needle Files |
 |
Needle Files |
Ref : DMT011
Set of 10 files of different shapes: flat, round, half-round, triangular, square, etc ...
|
| Needle Files |
 |
Tamiya Putty |
Ref : DMT003
Putty filler, smoothing and finishing.
Also allows some textures effects. ...
|
| Tamiya Putty |
 |
Circular Cutter |
Ref : DMT007
Circular cutter for cutting discs and circles in plastic card, cardboard, paper, sticker...
Allows you to draw with ...
|
| Circular Cutter |
 |
Modelling Knife |
Ref : DMT005
For the preparation of your parts, for cutting, deburring …
All in metal, aluminum handle and steel clamp.
Standard blade (No. 11).
|
| Modelling Knife |
|
|
 |
|
